Petrochemical Additives
locations:Home > Products > Petrochemical Additives
Oil/Water Well Block Remover(II)
Release date: 2015-10-13 & Source: & Views: 1008
  • The oil well block remover (II) is mainly used to remove block in oil well and water injection well from colloidal asphalt and heavy oil sediment or metal ion precipitation in order to restore formation permeability and increase the production or water injection.


    1. Typical physical properties /Technical data

    (1)Appearance: brown liquid;

    (2)Density:1.10~1.15g/cm3;

    (3)Dispersivity: soluble in water at any rate;

    (4)pH: 2~4;

    (5)Performance of eliminating oil-based filter cake or scale: eliminate 50~80% within 1-2 hours.

     

    2. Applications

    (1)Remove colloidal block of water injection well and iron ion precipitate.

    (2)Remove block from colloid and asphaltene, heavy oil precipitation of oil wells. 

    (3)Suitable for formation temperature 150℃ or less.

     

    3. Uses

    The product is mixed well in water at the ratio of 1:5 and injected into formation with the cement truck. Shut two to three hours, then flush and drain.

     

    4. Dosages

    Every meter of reservoir 2 m3 (perforation penetration).

The product name:Oil/Water Well Block Remover(II)
Name: 
Phone: 
Email: 
Massage: 
©2015 Jilin Mainland Import and Export Co., LTD .All right   吉ICP备15005260号-1   Home | About Us | Products | Sales Networks | Cooperation | Contact Us
点击关闭
  • Online Service
    Skype