Petrochemical Additives
locations:Home > Products > Petrochemical Additives
(XL) Oil Layer Blockage Remover
Release date: 2015-10-13 & Source: & Views: 1075
  • When the oilfield is in its final development stage with high content of water, the block near wellbore formation is severer due to the frequent operation, which causes large number of flushing fluid, workover fluid, and adjustment well drilling fluid flow to the bottom.  A conventional fracturing acid has to be used to remove blockage periodically, causing the production cost rising year by year. Therefore, it is more and more important to develop low cost, high efficiency, easy to use, and reliable oil layer block remover. This product is mainly used for removing emulsion block and water block. Emulsion block can significantly reduce the conduction ability near the oil well, causing Jamin effect and block the formation.  According to the phase volume theory when water content of crude oil is less than 20% only w/o emulsion can form.  When water is between 26~74% in crude oil, based on the mineral composition of crude oil, both w/o and o/w emulsion can be formed. If water content in crude oil is over 74%, only o/w emulsion can form. It is mainly the w/o type emulsion that affects the penetration.  Emulsion entering the pore is additive to Jamin effect, producing significant resistance.  Only when the resistance is less than pressure generated from the back, emulsion flow into the pores and emulsion block is removed. Water block is another phenomenon that water blocks the oil from flowing into pores, making oil phase permeability decline and water phase permeability increase, resulting in lower productivity.  The key to remove the above blockage is to have low oil-water interfacial tension and water wet formation surface.  we developed this block remover mainly consists of cationic and non-ionic surfactant, with addition of wetting agent, dissolving alcohol, electrolyte, anti-swelling agent to have the synergistic effects to achieve the goal of removing emulsion block and water block.

     

    1. Typical physical properties /Technical data

    (1)Appearance: Brown black liquid;

    (2)pH:8-11(4% water solution);

    (3)Freezing point:≤-18℃;

    (4)Solubility: fully dispersed in water;

    (5)Density:0.901.05g/cm3;

    (6)Surface tension: ≤35mN/m;

    (7)Emulsion breaking rate: ≥95%.

     

    2. Uses 

    Add in water at 5-10% and stir well.

     

    3. Shipping and storage

    25kg/200kg metal or plastic drum. Store in cool and well-ventilated place.

The product name:(XL) Oil Layer Blockage Remover
Name: 
Phone: 
Email: 
Massage: 
©2015 Jilin Mainland Import and Export Co., LTD .All right   吉ICP备15005260号-1   Home | About Us | Products | Sales Networks | Cooperation | Contact Us
点击关闭
  • Online Service
    Skype